The purpose of this report is to consolidate the technical specifications, connector layouts, and BIOS configuration details for the Acer Q65H2-AM v1.1 motherboard due to the lack of a single, unified commercial manual. This document serves as a reference for hardware maintenance, upgrade compatibility, and troubleshooting.
The LGA 1155 socket requires care. Align the triangle on the processor with the triangle on the socket. The board supports Intel Core i7, i5, and i3 processors, typically maxing out at 95W TDP. 2. Memory Setup
Because it was never sold at retail, Acer does not provide a standalone manual download for the "Q65H2-AM." Instead, the documentation is bundled within the However, those 200+ page service guides are cumbersome. This article extracts the essential data from those service guides and community teardowns. acer q65h2-am v1.1 manual
The jumper sits on a 3-pin block. Move the plastic jumper cap from the default over to Pins 2-3 (Clear) .
6x USB 2.0 ports on the rear (plus 3 internal headers for up to 6 more). The purpose of this report is to consolidate
The Front Panel Header (Power SW, HDD LED, Reset) on v1.1 is often a proprietary 9-pin block . Do not use standard ATX pinouts without verifying voltage with a multimeter, as pin 7 may be +5V instead of Ground .
Interestingly, some revisions of this hardware were flagged or recalled in certain markets due to minor defects or overheating risks. If you are reviving an old Veriton, a thorough physical inspection of the PCB tracks and capacitors is highly recommended before powering it on for the first time in years. Align the triangle on the processor with the
Intel Core i7-2600, i5-2500/2400/2300, and i3 dual-core (Max 95W TDP).
4 x 240-pin DDR3 DIMM slots, supporting up to 16GB of dual-channel non-ECC, unbuffered DDR3 1333 MHz RAM. Expansion Slots: 1 x PCI Express x16 (2.0). 2 x PCI Express x1. 1 x 32-bit PCI slot. Pinout & Connector Guide