Resetting the digital counter does not physically clean the ink pads. If you reset the printer multiple times without replacing or washing the internal sponges, excess ink may eventually overflow and damage your desk or the internal circuitry of the printer.
Never pay for a tool advertised as "free download" on sketchy forums. Step-by-Step Instructions: How to Use ST5510
It is proprietary software reserved for . It is not available on Canon’s public driver download pages.
: Windows 7, 8, 10, or 11 (32-bit or 64-bit).
G1000, G2000, G3000, G4000, G1010, G2010, G3010, G4010 MG-Series: MG2570S, MG3070S, MG2970, MG3570, MG5570 E-Series: E400, E410, E460, E470, E480, E510, E560 IP-Series: iP2770, iP2870, iP7270 Step 1: How to Put Canon Printer into Service Mode
A small popup message saying "A function was finished" should appear. Click OK.
A: No. The ST-5510 runs only on Windows (Windows 7 to 11). There is no Mac or mobile version.
: Some downloads force unwanted browser extensions and tracking cookies onto your system.
The tool should now show your printer model in the dropdown menu. Step 3: Perform the Reset Under the "Clear Ink Counter" section, click .
While still holding Power, press the (or 6 times for some G-series models). Release both buttons simultaneously.
Press and hold the button (triangle inside a circle). While holding Stop/Reset, press and hold the Power button.
Modern Windows blocks unsigned drivers. The ST 5510 uses a digital signature from Canon that has often expired. To run the tool, you may need to:
Ensure no other printing software or print queues are active when running the executable file.
Resetting the digital counter does not physically clean the ink pads. If you reset the printer multiple times without replacing or washing the internal sponges, excess ink may eventually overflow and damage your desk or the internal circuitry of the printer.
Never pay for a tool advertised as "free download" on sketchy forums. Step-by-Step Instructions: How to Use ST5510
It is proprietary software reserved for . It is not available on Canon’s public driver download pages.
: Windows 7, 8, 10, or 11 (32-bit or 64-bit).
G1000, G2000, G3000, G4000, G1010, G2010, G3010, G4010 MG-Series: MG2570S, MG3070S, MG2970, MG3570, MG5570 E-Series: E400, E410, E460, E470, E480, E510, E560 IP-Series: iP2770, iP2870, iP7270 Step 1: How to Put Canon Printer into Service Mode
A small popup message saying "A function was finished" should appear. Click OK.
A: No. The ST-5510 runs only on Windows (Windows 7 to 11). There is no Mac or mobile version.
: Some downloads force unwanted browser extensions and tracking cookies onto your system.
The tool should now show your printer model in the dropdown menu. Step 3: Perform the Reset Under the "Clear Ink Counter" section, click .
While still holding Power, press the (or 6 times for some G-series models). Release both buttons simultaneously.
Press and hold the button (triangle inside a circle). While holding Stop/Reset, press and hold the Power button.
Modern Windows blocks unsigned drivers. The ST 5510 uses a digital signature from Canon that has often expired. To run the tool, you may need to:
Ensure no other printing software or print queues are active when running the executable file.
