: Access the CLI via SSH (Port 22) or Telnet (Port 23) using a privileged account (usually admin ).
Often user: admin , password: password or ericsson (dependent on setup). Accessing Modes: User EXEC Mode: > prompt (limited commands). Privileged EXEC Mode: # prompt. Switch using: enable Use code with caution. Configuration Mode: # prompt. Switch using: configure Use code with caution. Hidden Commands: For advanced troubleshooting, use: cliunlock Use code with caution.
show vlan : Displays configured Virtual Local Area Networks (VLANs) and their assigned ports (tagged or untagged). ericsson mini link cli commands
test radio bert 1 duration 60 pattern pn23
To see who is currently logged into the node: : Access the CLI via SSH (Port 22)
To access the CLI, connect via or SSH using the device's IP address. Default Password : ericsson .
/admin> ls system radio ethernet services alarms /admin> cd radio/1 /admin/radio/1> pwd /network/radio/1 Privileged EXEC Mode: # prompt
| Mode | Prompt Example | Purpose | |------|----------------|---------| | User Exec | MINI-LINK> | Basic monitoring, pings, show commands (limited) | | Privileged Exec | MINI-LINK# | All show commands, debug, clear counters, reload | | Global Config | MINI-LINK(config)# | System-wide settings | | Interface Config | MINI-LINK(config-if-eth0)# | Port-specific settings | | Radio Config | MINI-LINK(config-mdradio)# | Radio parameters (frequency, power, ID) |
configure interface eth set vlan-untagged exit Use code with caution. 5. DCN (Data Communication Network) and IP Routing
: Displays the configuration that will load on the next reboot.