Hp Probook 450 G0 Disassembly _verified_ -

Use a plastic pry tool or pull on the edge of the optical drive bezel to slide the entire drive out from the side of the chassis. Step 5: Removing the Keyboard

Carefully pry up the two antenna cables (black and white) from the card using a plastic tool or tweezers. Remove the single Phillips screw securing the card. Pull the Wi-Fi card out of its mini-PCIe slot. Step 4: Removing the Optical Drive

Disconnect these before the main board to avoid shorts. hp probook 450 g0 disassembly

Remove the four Phillips screws securing the hard drive caddy to the laptop chassis.

: For re-seating the heatsink on the CPU/GPU. Step 1: Isolating Power and Removing the Battery Use a plastic pry tool or pull on

Slide both latches inward toward each other. The battery will unlock and pop up slightly. Lift the battery out of its compartment and set it aside.

Remove the small Phillips screws located under the keyboard area that hold the upper case down. Pull the Wi-Fi card out of its mini-PCIe slot

As mentioned above, remove the main battery.

Apply a of new thermal paste to the CPU die before reassembling the heat sink.