31015 ^new^ — Manual Alpina It

: Features a distinct analogic ignition coil (compatible with Alpina P34, 330, 380, and 432 models)

If you are using this machine without the original manual, follow these standard Alpina chainsaw safety and maintenance protocols:

Adjust the 'L' (Low-speed) and 'LA'/'T' (Idle speed) screws using standard tuning protocols. Blocked oil delivery port holes

: Firmly grip the front handle with one hand, place your boot tip through the rear handle loop, and pull the recoil starter cord swiftly until the engine fires. Manual Alpina It 31015

: Always wear head, eye, and ear protection. Petrol chainsaws should be operated with two hands and are designed for one person only.

: Pull the starter rope slowly for 10–15 cm until you feel mechanical resistance, then give it a series of short, aggressive tugs until the engine briefly fires.

Pull the starter rope again until the engine fires completely up and stays running. : Features a distinct analogic ignition coil (compatible

: Keep the manual hand guard pushed forward into the locked position during startup. This mechanism keeps the chain stationary even if the engine revs quickly.

Maintaining proper cutting tension protects the user from dangerous "chain throw" accidents.

Built with a rear-handle control scheme and an anti-vibration system to isolate the operator's hands during extended cutting sessions. Safety Protocols & Starting Procedures Petrol chainsaws should be operated with two hands

: Pull the starter handle smoothly until you hear the engine attempt to fire or "cough", then immediately push the choke lever halfway back in.

Press the primer bulb 7–10 times until fuel is visible in the lines.