Mikrotik L2tp Server Setup Full [extra Quality]

192.168.89.1 (The router's IP within the VPN subnet) Remote Address: l2tp-vpn-pool In the Protocols tab: Use Encryption: yes or required In the Limits tab (Optional):

You need to restrict clients to only.

/ppp active print

/ip ipsec peer add address=0.0.0.0/0 exchange-mode=main-l2tp passive=yes generate-policy=port-override mikrotik l2tp server setup full

Here is a complete script to configure L2TP/IPsec from scratch. Dst. Port: 500

Chain: input , Protocol: udp , Dst. Port: 500 , Action: accept add routes on upstream routers.

Usually not necessary if clients and LAN are on connected subnets and NAT handled. If you put clients on a routed subnet behind router, ensure LAN hosts route back to the L2TP pool via the router (i.e., router is their default gateway). For advanced multi-router environments, add routes on upstream routers.