Optional: If your PC fails to recognize the device after a few seconds, plug the power adapter into the wall and TV box while continuing to hold down the recovery button. Step 6: Execute the Firmware Flash Update
Under the configuration panel on the right side, ensure is checked (Normal Erase) and Erase Bootloader is checked. Leave other default settings untouched. Step 4: Connect the MXQ Pro 4K to the PC
Needed to press the hidden recovery button inside the AV port. mxq pro 4k firmware update via usb verified
Open the TV box (usually four screws on the bottom) to check the printed on the PCB.
Updating via USB (using the "Amlogic USB Burning Tool") is the most reliable method to unbrick a device or perform a clean install when the device won't boot into Android. Optional: If your PC fails to recognize the
Wait a few moments for the software to verify and load the image. Step 3: Connect the MXQ Pro 4K to the PC Do not plug the power adapter into the TV box yet. Plug one end of the USB male-to-male cable into your PC.
Before starting, gather the required hardware assets and prepare the host workstation: Step 4: Connect the MXQ Pro 4K to
TV boxes with Allwinner H3 CPU, like some MXQ Pro 4K 5G models.
What chip is listed on your board or box (Amlogic, Rockchip, or Allwinner)?
This is a last-resort method but is verified to work on 95% of “bricked” MXQ Pro 4K boxes.
and copy the firmware file into it. Ensure no other files are on the drive. Initiate Update