Nalco 73385 Msds !full! -

Nalco 73385 is a broad-spectrum, non-oxidizing biocide primarily used for cooling water bio-control . It is engineered to target microorganisms that cause operational issues in recirculating cooling towers and closed-loop systems.

The water and chelating agents are generally low toxicity, but the concentrated molybdate solution is alkaline (pH between 11.5 and 13.0), which drives the corrosive classification.

As of June 1, 2015, OSHA aligned its Hazard Communication Standard (HCS 2012) with GHS. While many still search for "MSDS," the official current document is the SDS. This article uses both terms but focuses on the modern SDS format. nalco 73385 msds

Approximately 3.7 to 13.0 (varying by specific regional formulation or concentration). Density: Approximately 1.13 kg/L to 1.20 kg/L. Solubility: Complete in water. Flammability: Non-flammable and non-combustible. Safety and Hazard Identification

Industrial water treatment, cooling water automation, and scale/corrosion inhibition. As of June 1, 2015, OSHA aligned its

Immediately flush eyes with a copious stream of clean, lukewarm water for at least 15 minutes while holding eyelids open. Remove contact lenses if applicable. Seek urgent medical attention.

For the most current, authoritative Nalco 73385 MSDS, always go directly to — and then verify that your local copy matches the revision date on their portal. Approximately 3

However, with its effectiveness comes chemical risk. The — now formally known as the SDS (Safety Data Sheet) under GHS (Globally Harmonized System) — is the legally required document that communicates the hazards, handling protocols, and emergency measures for Nalco 73385. Accessing and understanding the Nalco 73385 MSDS is not just a regulatory checkbox; it is a critical safety practice.

Nalco 73385 is a high-performance industrial water treatment chemical, typically used as a in cooling towers, boilers, and wastewater systems. Manufactured by Nalco Water (an Ecolab company), this product is essential for maintaining thermal efficiency and asset integrity in heavy industries such as power generation, petrochemicals, and HVAC.