Smart Pss Pc Nvr Setup -

Assign your NVR a static IP address within your local network to prevent connection drops.

: Allocating or deleting a disk setup will erase all existing data on that specific partition; confirm the prompt to proceed. 3. Channel and Device Management

What or status indicator (like a red dot) you see smart pss pc nvr setup

During the component selection screen, check both and PC NVR . Complete the installation wizard.

With your NVR successfully online, you can now view your live camera feeds. Assign your NVR a static IP address within

Method A: Adding via Local IP Address (Best for Local Networks)

Go to the Smart PSS homepage and click on (Configuration). Select your local PC NVR from the device list on the left. Navigate to the Disk Manager tab. Select the drive partition you want to use for recording. Enter the amount of space (in GB) you want to allocate. Click Allocate . Channel and Device Management What or status indicator

After adding your NVR, look at the device list in the Devices menu. Under the column, you should see a green dot indicating the status is Online . If it shows a red dot or an offline error, double-check your NVR's network connection, IP address accuracy, and login password. Step 4: Live View Configuration and Stream Optimization

How to Setup a PC NVR on Smart PSS: A Complete Guide Setting up your computer as a Network Video Recorder (NVR) allows you to record surveillance footage directly to your PC's hard drive without purchasing dedicated NVR hardware. Dahua’s Smart PSS (Smart Professional Surveillance System) software features a built-in PC NVR module designed exactly for this purpose.

Before we dive into the setup process, let's review the system requirements for running Smart PSS on a PC:

This usually indicates an incorrect IP address or a network mismatch. Ensure your computer and NVR are on the same network subnet (e.g., both start with 192.168.1.X ).