To change: Use ▲/▼ to select parameter, press , adjust value, press SET to store. Exit by pressing MENU repeatedly.
Maintain a minimum clearance of 150mm above the main body inside the ceiling cavity.
Shows the current setting of the hot water temperature (ranging generally from 35°C to 60°C). On/Off Button: Starts or shuts down the water heater.
Open the water tank and fill it with clean, cold water. For enhanced cooling, you can add small ice cubes. tgc bc901h manual
If heavily soiled, rinse the filter under lukewarm water. Do not use harsh chemical detergents.
This feature turns your bathroom into an efficient clothes-drying cabinet by utilizing a combination of heat and air extraction.
Turn the unit off and then back on using the On/Off button on the remote to attempt a reset. To change: Use ▲/▼ to select parameter, press
The TGC BC901H is designed for user-friendly operation with a digital panel or remote control. Basic Operation
Press the On/Off button on the control panel. The temperature display will light up.
TGC gas water heaters can support up to three wired remote controls: two for bathrooms (model BC-90-1H) and one for the kitchen (model MC-90-1H). When multiple remotes are installed, only one can have priority control to set the water temperature. The on the remote shows which one has this control; each remote can remember its own last set temperature (max 48℃). Shows the current setting of the hot water
: Many medical or telecommunications devices must comply with specific safety and performance standards. For instance, the manual for the BC901 phone will reference compliance with EN/IEC 60601-2-37 standards for medical electrical equipment, ensuring basic safety and essential performance [8†L10-L12].
When an issue occurs within the central heat exchanger or gas lines, the BC-90-1H behaves as a diagnostic terminal.
, including setup, operation, maintenance, and troubleshooting, acting as your guide for optimal functionality. 1. Introduction to the TGC BC901H TGC BC901H
The unit is operated via a simple control panel. Here is how to navigate its features: Press to turn the unit on or off.